Will exhaust manifold from BMW E36 318is M44 1.9 fit 1995 E36 318is M42 1.8?
In: Dodge
30 Dec 2009i have a 1989 dodge ram pickup and i was wondering if i could switch out the old intake manifold and throttle body (TBI) for an edelbrock intake manifold and carburetor??? and how much work would be involved???
In: Dodge
30 Dec 2009the car is a 1966 dodge dart 270 model with a slant six 225 3.7L and ive heard about people doing this but cant find a kit or anything and it would also be helpful if u could also explain how to rig up the linkage it would be helpful thx.
In: Ford
19 Dec 20091986 Ford F _250 2 wheel 460 motor
In: Ford
19 Dec 2009i have a 200 ford crown victoria. there is smoke thats starting to fill the inside of my car and my car is starting to hesitate…. what could be
In: Ford
19 Dec 2009i have a 1985 f150 and there was a crack in my intake and exhaust and was able to get a new intake from ford but not the exhaust manifold. so I got one from kragen it has all the smog equipment but if they see it do you think they will fail me on [...]
In: Ford
18 Dec 2009we have a 86 Ford LTD Crown Vic with a 351 in it. its going to be a demo car. we want to flip the exhaust manifold around so they are directed up out of the hood. all chevy 350’s can do this but not sure about the 351 windsor.
In: Ford
18 Dec 2009I drive the hills and when I stop my exhaust minifold gets so red hot almost white. Whats my problem? I changed the coverter and tail pipe.
1988 ford ranger 2.3
In: Ford
18 Dec 2009has anyone else seen a problem like this? i think oil has made its way through the hose and destroyed it. and if this is the case, would it cause rough idle and poor gas mileage?
In: Ford
18 Dec 2009the studs have rotted out and im losing compression,i dont want to spend hundreds of dollors in a shop,i always do my own repairs n im stumped on this one
In: Ford
18 Dec 2009Inspect the old manifold for pits on the mating surface. If OK then clean both surfaces with abrasive cloth (180 grit). If it’s a small block V8 & it’s the RH manifold, then intake plenum will have to be removed. The manifolds are best installed without a gasket.(allows then to stay [...]
In: Ford
18 Dec 2009How do I replace it? The exhaust manifold gasket is what connects by the catalytic converter, right? Would I be able to just pull the converter off (I have no muffler) and replace it that way or do I have to do it from the hood and tear half my motor up? Someone please give [...]
In: Ford
18 Dec 2009I have a 99 Ford Escort, and the exhaust is leaking from the manifold. The car still ran fine up until last night, it started putting really bad and making really loud noise… Kinda sounds like the engine is gonna blow, but I don’t think so.. I was just wondering if an exhaust manifold [...]
In: Ford
18 Dec 2009has a clicking sound from exhaust leak, i was quoted if split flange is used, $50, if not it would be $400 for converter and pipes and all
In: Ford
18 Dec 2009I am not trying to get jacked by the mechanic is So. Cal./ I.E.
In: Ford
18 Dec 2009I have a boat that my father is rebuilding he has been sick and now this is one of his joys can anyone help
Apparently, my cheap-skate grandpa kept some of the original engine parts on his 66 Ford LTD. i have not found the enigine casting number yet, but the exhaust manifold, intake manifold, and water pump all say 66 Ford LTD. My heads, however, say 72 Ford Bronco. My exhaust manifolds were leaking, but i have the [...]
In: Ford
18 Dec 2009Nuff said
In: Ford
18 Dec 2009yes the last letter is location of production stamp
In: Ford
18 Dec 2009whats the truth about the exhaust manifold bolts on the ford 460
I hear they break ? Are there better after market bolts?
In the 9th Nov, 2009 � RSPAuto make over this site to be place where you can make a question where or how you should buy auto parts or parts replacement for your cars or motorcycles