Posts Tagged ‘Bolt’
Bolt Pattern Daewoo Tico 1997?
In: Daewoo
1 Mar 2010i bought a rolling chassis of a deadwood tico to hit vtec! lol
can anybody tell me the wheel bolt pattern to order wheels?
thank you!
Is stainless A2-70 a good bolt material for automotive suspension parts? Such as using it to mount the coilovers to the car. One of the current bolts broke and I am have a very hard time find this one bolt. And when I do find it, it comes in stainless A2-70
The bolt I am looking [...]
- (2) Comments
- Tags: A270, Automotive, Bolt, Good, Material, Parts, Stainless, Suspension
I Am Looking For A Nearly Unbreakable Bolt In Rear Axle Assembly For A Z71 Half Ton?
In: Trucks
15 Feb 2010I have a 89 chevy 1/2 ton 4×4 with a few mods done to it. not really the serious offroad truck but it does see its use. i have rebuilt the rear end (10 bolt) three times due to poor work from a shop 1 time and twice from mechanical failure. I have killed it [...]
- (5) Comments
- Tags: Assembly, Axle, Bolt, Half, Looking, Nearly, Rear, Unbreakable
i have tried 9/16 to small 15mm to big i just can not find the right size socket too fit these bolts.this is the upper control arm and is called sometimes upper balljoint assembly.
- (2) Comments
- Tags: 1995, Bolt, Control, Ford, Need, Size, Socket, Thunderbird, Upper
About 2 months ago, I had a ball joint go out on the passenger side of my Thunderchicken. When my mechanic went to replace the lower control arm assembly (because the ball joint is pressed and almost impossible to remove without taking out the entire assembly) one of the bolts was broken. He [...]
- (2) Comments
- Tags: 1991, Bolt, Control, Ford, Looking, Lower, Size, Thunderbird, What
Where Can I Order The Bolt That Camber Shims Sit On In The Upper Control Arm Of A ‘90 Gmc Suburban?
In: GMC
9 Feb 2010Where Can I Order the bolt that camber shims sit on in the upper control arm of a ‘90 GMC Suburban online.
How Do You Remove The Alternator From A 2000 Dodge Intrepid? I Can’t Find The 4th Bolt.?
In: Dodge
8 Feb 2010I’ve removed the radiator support bracket and everything. And I’ve replaced plenty of alternators on our family vehicles. But I cannot find what’s hanging up this alternator.
- (2) Comments
- Tags: 2000, Alternator, Bolt, Can't, Dodge, Find, From, Intrepid, Remove
I have a 2001 gmc sierra 2500HD diesel and i want the front end that is on the 2003 gmc sierra 2500HD. grille, bumper, valance, ect. will it bolt right up if i take the 2001 front end off
2004 Jeep Cherokee, I Have Radiator Fluid Dripping Off A Bolt At Bottom Of Flywheel Cover.?
In: Jeep
28 Dec 2009It’s coming from the top of the flywheel where it meets the back of the engine. What could be leaking? Is there a freeze plug at the very back of the engine??????????
Does Anyone Make A Wheel Adapter To Go From A Chevy 8 Bolt Rim To A Jeep 5 Bolt Axle?
In: Jeep
23 Dec 2009probably but it would be cheaper to go with a new wheel.
I have a 2001 Jeep Cherokee Sport and it has the stock 15″ 5×4.5 wheels on it. I really like the alloy 2008 Jeep Sahara wheels but the on problem is they are 5×5 bolt pattern. What do I need to do to get these wheels to fit my jeep?
What Is The Bolt Patern For A Jeep Liberty Wheel??? 4.5 Or 5?
In: Jeep
23 Dec 2009its 5.
Is The Bolt Pattern On A 98 Jeep Grand Cherokee Wheel The Same As A Ford Or A Chevy?
In: Jeep
23 Dec 20095 on a 4.5 circle
New Jeep Doesnt Fit The Same Wheel Bolt Pattern As My Old Jeep But I Want To Use The Same Custom Wheels I Had?
In: Jeep
22 Dec 2009I had a 95 Jeep Grand Cherokee, now i’ve gotten a 2000 Jeep Grand Cherokee but the bolt pattern is slighly wider spaced, is there a way i can change lug nut patterns?
I am trying to replace my clutch solo and I am having trouble removing the suspension bolt from the left side. I have been working at it for about 3 hours and no-go. I know if its forced by air or whatever, that it will strip it.
Any kind of help would be appreciated.
Thanks
- (2) Comments
- Tags: Bolt, Easiest, Ford, From, Left, Remove, Side, Suspension, What's
Easy Bolt On Hp For Ford 1972 Ford Gran Torino 351 2v Windsor?
In: Ford
19 Dec 2009any ideas lol. its got 163 horse from the factory, and with new exhaust it sounds nicer, but isnt really that quick. any cool ideas definately tell me!
Where Can I Find Ford Explr Engine Bolt Torq Spex, And Sequences, Head, Manifolds, Etc??????
In: Ford
19 Dec 2009I need to find a website that has some comprehensive Ford tech data for current Ford engines, looking for 1996 Ford explorer 4.0L V6. Looking for head, intake, exhaust manifolds, sequence, and torQ spex, to re-assemble.
1993 Ford Bronco 302 The Coolant Leaked Out Of One Of The Exhaust Bolt Holes When The Bolt Was Removed.?
In: Ford
18 Dec 2009Is this normal.
1988 Gmc Sierra 350 Bolt?
In: GMC
18 Dec 2009Hey im just wondering I have a 4.3 : v6 in the gmc, i have been to lazy to check before hand, but will a 350 4 bolt fit onto the same standard transmission i have for my v6? and or is the clutch disk a completely different size?
- (3) Comments
- Tags: 1988, Bolt, Sierra
i found a guy making 24v dohc kits for the straight 6 4.0 engine that basically turns your tired old ohv 12 valve jeep motor into the equivalent of porsche or supra engine with as much hp as a stock vortec 454 & as much torque as a 350 or 360 magnum-with 5-10 mpg better [...]
About this site
In the 9th Nov, 2009 � RSPAuto make over this site to be place where you can make a question where or how you should buy auto parts or parts replacement for your cars or motorcycles
Premium Advertiser
Categories
- yhidutumunyk: yhidutumunyk... [...]
- Wheeler Dealers Suzuki SJ410 part 3 | World online cars review: [...] How Can I Solve My Suzuki Sj Carburetor Problems Easily? And Will … [...] [...]
- rhinestones: Does the engine turn over? need fuel and spark. Don't walk Run Out of that -Shop? !!Find a MECHANIC [...]
- sho_nuff: Here is a $3 way to check if it is the fuel pump. Go to the auto store and get aersol carb or intake [...]
- alanlans: I have been a tech all of my life. I am also a service writer for the last 16 years. I have never [...]
- CLEAR LENS FOG LIGHTS KIT with BULBS
- Volvo s70 gearbox/abs module ?
- My Car Won’t Start And The Mecanic Thinks It Might Be A Clogged Air-intake Value, Rather Than A Fuel Pump I
- 1986 Nissan Hardbody, No Fuel?
- I Have A 2000 Daewoo Nubira That Jerks To The Right A Little After Making Turns, Be It A Left Or Right.?
- Daewoo Lanos Car Noisy At >70kmph?
- Daewoo Kalos Sx Scrapping Noise?
- Bolt Pattern Daewoo Tico 1997?
- Where Is The Best Place To Get New Wheels And Tyres In A Package And Fitted?
- My Nissan Won’t Start? I Was Driving And It Stopped And Never Refired. Spark Ok, T-chain Is Ok Dist Turns
Recent Terms
Car smoking after turn offPenta running hot bad bellows
2001 bmw e46 problems
Dodge ram wont start alarm won t disarm
Service engine soon 2009 sentra
My coolant reservoir is full but my radiator is empty
To flywheels go bad in 1999 lincoln navigator
Headlight electrical short out honda odyssey
06 ninja 650r switches
Ford aerostar hood latch
Disable check engine light e38 bmw 740il
Tail lights brake light turn signals dont work ford ranger
driver side door panel altima
99 ford f250 diesel parts fische
Where can i buy a ccrm for my car
2001 accord will not pass 20mph
Replace shocks on a 2001 toyota sienna
Problem with ford explorer evap system
Is it normal to hear squecks after brake and roter grind
Toyota corolla vibration engine mounts
