Archive for the ‘Suzuki’ Category

ITs a suzuki alto 2005 model I think its only availabe in india and pakistan or I think asia.It has a carburetor which i want to replace with EFI system as it provides better fuel efficiency and smooth drive.Im also curious that which one is better carburetor or efi.

I’m taking part in this years Mongol rally so have a tough 10,000 miles ahead. A rusted fuel tank has been blocking the jets in the carb. Is there an easy solution for cleaning this or is it a case of needing to remove the carb easy time and blast it with air? Anyone know [...]

Ok, so I just rebuilt and reinstalled the carb, air box, and gas tank onto my bike. It starts up and runs fine, idles fine, rev’s fine, but here is the dilemma. The idle is tuned to 1500 rpms, and when you pull on the throttle, it will rev fine, to 5, 6, [...]

I have an old 1975 Suzuki TS185 dual sport bike. its a 2-stroke 185cc enduro but needs some things to make it ride like it use to. It needs a new carburetor (i have tried cleaning it with sprays and baths but the throttle system is still faulty) so i was wondering what options i [...]

where can i get some

depends on where you live , you ned to find a old school mechanic , stay away from the dealerships find a private mechanic

i think it will bolt up but has a smaller primary bore so if it did work you’d have less power

The Brand name and code are AISIN 1G30. I want to get a carb kit but no one seems to know what kit I need. PLease help.

I am having trouble reinstalling the carbs on my 1981 Suzuki GS650EX. Specifically, I’m having trouble getting the carb outputs into the intake pipes. Everything is lined up properly (and yes, I’m sure the carbs are facing the right way), but the darn things just won’t go in. I’m wondering if perhaps the rubber on [...]

hey does anybody know where i can find just the carburetor needle for an 2006 Suzuki RM 85? i would really appreciate it!! Thanks!!

it might but are the motors the same size?if it did fit and they are different ccs the you would have to rejet the carb so it will run rite.

I’m doing up a 1980 TS 125 and when i tried to install the carburetor, the hose leading from the air box to the carby wont go over the lip on the carb. It seems to be fairly old and stiff. What would be the best way to make the hose budge/ soften, without replacing [...]

when you are askin these questions
please show wt year and wt engine it has . suzuki lt 80s have been made for 15 years and most of them are different

Is it possible to have both, cause when I turn it on you can hear something in the gas tank going that sounds like a fuel injector?

Please help me! I need to know how to install a carburetor into my motorcycle!

Need help rebuilding a carb open to all suggestions/Info/websites

Okay, ive got two breather hoses on the carb just hanging out and not connected to anything, and then the main fuel line from the fuel cock INTO the carb – is that at least correct?.. then theres another hose port that is on the side facing up in front of the choke adjustment. WHAT [...]

I have a 6 year old suzuki 125cc 2 cycle dirt bike. It sat for 2 years and was never ran during those years. Now when I went to start it back up I can get it to start but gas pours out of the over flow tubes that are connected to the carburetor. [...]

My bike is GN 400, single cylinder, kick-only, chopped and ready to rock ‘n roll. Well, almost. The float in the carburetor has a whole in it and nothing I’ve tried will fix it. I need to know the model number of the carb so I can order a new float but I can’t find [...]

i got my suzuki katana ay50 just 2 days ago and already the carburetor has packed up. i cant find one anywhere on the internet, can someone please help me!


About this site

In the 9th Nov, 2009 � RSPAuto make over this site to be place where you can make a question where or how you should buy auto parts or parts replacement for your cars or motorcycles

Premium Advertiser


eXTReMe Tracker